GE Monogram Range - Manual (Page 12)

Runners
To Support
Leveling Legs
Panel
Range
Opening
Range
Opening
Runners
for Rolling
the Range
into Position
2 Lift the toekick out of the foam base.
Installation Preparation
MOVE THE RANGE INDOORS
1 Tilt the range forward on the skid.
STEP 2
3 Tilt the range to one side and remove the foam block.
6 Move the range indoors. Position the range
in front of the installation location.
7 Place the appliance runners on the floor
at the left and right sides of the opening.
The runners provide a surface for rolling
the range into the final position and will protect
the floor finish. The runners must be removed
before leveling the range.
12
Insert Blade Under
the Range Legs
4 Slide the blade of the hand-truck beneath
the front and back legs.
IMPORTANT: Place the hand-truck straps below
the oven door handles.
5 Tilt the range to lower the hand-truck wheels
off the skid.
Hand-Truck
Straps Below
Oven Door
Handles
Toekick
Toekick