Grizzly G1010 - Manual (Page 27)

G1010 4" x 6" Metal-Cutting Bandsaw
-25-
Blade Selection
The Model G1010 uses 64 1 ⁄
2
" x 1 ⁄
2
" bandsaw
blades.
Selecting the right blade for the job depends on
a variety of factors, such as the type of mate-
rial being cut, hardness of the material, machine
capability, and operator technique.
We suggest you do some research for your spe-
cific situation so you get the best blade to match
your needs.
Grizzly is proud to offer a variety of selections
that can be found in the current catalog and in
ACCESSORIES on Page 28.
The feed rate is controlled by the spring and
handle shown in
Figure 29.
To adjust the feed rate:
—Slower: Twist the handle clockwise to add
tension to the spring.
— Faster: Twist the handle counterclockwise
to remove tension from the spring.
Feed Rate
Figure 29. Feed rate adjustment.
Spring
Handle