Base supports – Grizzly G9984/G9985 User Manual
Page 15
G9984/G9985 Oscillating Belt Edge Sander
-13-
Attaching the base supports to the main base:
1.
Slide the base supports under the main
machine base.
2.
Using (4) M10-1.5 x 30 hex bolts, (4) 10mm
flat washers, and (4) 10mm lock washers,
secure the main machine base to the base
supports as shown in
Figure 7
. Be sure the
lock washer is between the hex bolt head and
the flat washer when installing.
Base Supports
Figure 7.
Attaching base supports to main base.
Bolt Here
See also other documents in the category Grizzly Grinding machines:
- G0574 (32 pages)
- H7760 (32 pages)
- H2881 (1 page)
- 9962ZX (80 pages)
- G0565 (32 pages)
- G0473 (24 pages)
- 6" random orbital sander H8120 (4 pages)
- G1276 (34 pages)
- G1071 (40 pages)
- Pneumatic Sanding Drum G1970 (1 page)
- G9983 (60 pages)
- Air Belt H0596 (4 pages)
- G1079 (54 pages)
- G1066 (54 pages)
- G9907 (10 pages)
- G0512 (44 pages)
- G1014Z (27 pages)
- G1600 (1 page)
- H7672 (20 pages)
- 7" Angle Sander H0592 (2 pages)
- G0547 (35 pages)
- G0489 (28 pages)
- G0459P (56 pages)
- G0563 (52 pages)
- 12" Drum Sander G0459 (56 pages)
- G1971 (1 page)
- G0486/G0487 (76 pages)
- Drum H2882 (1 page)
- 7" Angle Polisher H0593 (2 pages)
- G0679 (11 pages)
- H8192 (36 pages)
- H3140 (32 pages)
- G3105 (26 pages)
- G0458 (48 pages)
- H8215 (8 pages)
- G9984 (44 pages)
- G0445 (80 pages)
- G1066Z (54 pages)
- G5049Z (26 pages)
- G9910 (10 pages)
- G8749 (24 pages)
- G1870 (2 pages)
- G0571 (3 pages)
- G0475 (20 pages)
- Oscilatign Spindle GO739 (32 pages)