beautypg.com

English, 1 standard cmos features – GIGABYTE GA-8I845GVM775 User Manual

Page 28

background image

GA-8I845GVM775 Motherboard

- 28 -

English

2-1

Standard CMOS Features

Date

The date format is , , , .

Week

The week, from Sun to Sat, determined by the BIOS and is display only

Month

The month, Jan. Through Dec.

Day

The day, from 1 to 31 (or the maximum allowed in the month)

Year

The year, from 1999 through 2098

Time

The times format in . The time is calculated base on the 24-hour
military-time clock. For example, 1 p.m. is 13:00:00.

IDE Primary/ Secondary Master, Slave

IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.
IDE Primary/Secondary Master(Slave) IDE Device Setup. You can use one of three methods:

Auto

Allows BIOS to automatically detect IDE devices during POST(default)

None

Select this if no IDE devices are used and the system will skip the automatic
detection step and allow for faster system start up.

Manual

User can manually input the correct settings

Access Mode Use this to set the access mode for the hard drive. The four options are:

CHS/LBA/Large/Auto(default:Auto)

Hard drive information should be labeled on the outside drive casing. Enter the appropriate option
based on this information.

Cylinder

Number of cylinders

Head

Number of heads

Precomp

Write precomp

Landing Zone Landing zone
Sector

Number of sectors

If a hard disk has not been installed, select NONE and press .

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

Standard CMOS Features

Date (mm:dd:yy)

Thu

, Jan 20 2005

Time (hh:mm:ss)

22:31:24

` IDE Primary Master

[None]

` IDE Primary Slave

[None]

` IDE Secondary Master

[None]

` IDE Secondary Slave

[None]

Drive A

[1.44M, 3.5"]

Drive B

[None]

Floppy 3 Mode Suport

[Disabled]

Halt On

[All, But Keyboard]

Base Memory

640K

Extended Memory

127M

Total Memory

128M

KLJI: Move

Enter: Select

+/-/PU/PD: Value

F10: Save

ESC: Exit

F1: General Help

F5: Previous Values

F6: Fail-Safe Default

F7: Optimized Defaults

Ite m Help
Menu Level `

Change the day, month,
year


Sun. to Sat.


Jan. to Dec.


1 to 31 (or maximum
allowed in the month)


1999 to 2098