GIGABYTE Intel Pentium 4 Processor Motherboard GA-8VM800M - Manual (Page 64)

GA-8VM800M Motherboard - 64 -
English
A. Create Array:
Press Enter on Create Array item, you will see the screen as shown below.
VIA Tech. VT8237 SATA RAID BIOS Ver 2.31
Channel Drive Name Array Name Mode Size(GB) Status
Serial_Ch0 Master ST3120026AS SATA 111.79 Hdd
Serial_Ch1 Master ST3120026AS SATA 111.79 Hdd
Create a RAID array with
the hard disks attached to
VIA RAID controller
F1 : View Array/disk Status
, : Move to next item
Enter : Confirm the selection
ESC
: Exit
Auto Setup For Performance
Array Mode RAID 0 (Striping)
Select Disk Drives
Block Size 64K
Start Create Process
Before create an Array, you have to set the array mode first. Select Array Mode and press Enter, use the
arrow key to select the array mode. The options are: RAID 0 for performance, RAID 1 for data protection,
and RAID SPAN for capacity.
VIA Tech. VT8237 SATA RAID BIOS Ver 2.31
Channel Drive Name Array Name Mode Size(GB) Status
Serial_Ch0 Master ST3120026AS SATA 111.79 Hdd
Serial_Ch1 Master ST3120026AS SATA 111.79 Hdd
Create a RAID array with
the hard disks attached to
VIA RAID controller
F1 : View Array/disk Status
, : Move to next item
Enter : Confirm the selection
ESC
: Exit
Auto Setup For Data Security
Array Mode RAID 0 (Striping)
Select Disk Drives
Block Size 64K
Start Create Process
RAID 0 for performance
RAID 1 for data protection
RAID SPAN for capacity