beautypg.com

English, Entering the q-flash, Utility – GIGABYTE Intel Pentium 4 Processor Motherboard GA-8VM800M User Manual

Page 54: Exploring the q-flash, Dual bios utility screen, Task menu for dual bios utility, Task menu for q-flash utility, Action bar

background image

GA-8VM800M Motherboard

- 54 -

English

Entering the Q-Flash

TM

utility:

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status
MB Intelligent Tweaker(M.I.T.)

Select Language
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving

ESC: Quit

F3: Change Language

F8: Dual BIOS/Q-Flash

F10: Save & Exit Setup

Time, Date, Hard Disk Type...

Step 2: Press F8 button on your keyboard and then Y button to enter the Dual BIOS/Q-Flash utility.

Step1: To use Q-Flash utility, you must press Del in the boot screen to enter BIOS menu.

Exploring the Q-Flash

TM

/ Dual BIOS utility screen

The Q-Flash / Dual BIOS utility screen consists of the following key components.

Task menu for Dual BIOS utility:

Contains the names of eight tasks and two item showing information about the BIOS ROM type. Blocking a
task and pressing Enter key on your keyboard to enable execution of the task.

Task menu for Q-Flash utility:

Contains the names of four tasks. Blocking a task and pressing Enter key on your keyboard to enable execu-
tion of the task.

Action bar:

Contains the names of four actions needed to operate the Q-Flash/Dual BIOS utility. Pressing the buttons
mentioned on your keyboards to perform these actions.

Dual BIOS Utility

Boot From.........................................

Main Bios

Main ROM Type/Size.............................SST 49LF003A

512K

Backup ROM Type/Size.........................SST 49LF003A

512K

Wide Range Protection

Disable

Boot From

Main Bios

Auto Recovery

Enable

Halt On Error

Disable

Copy Main ROM Data to Backup

Load Default Settings

Save Settings to CMOS

Q-Flash Utility

Load Main BIOS from Floppy

Load Backup BIOS from Floppy

Save Main BIOS to Floppy

Save Backup BIOS to Floppy

Enter : Run

:Move ESC:Reset F10:Power Off

Task menu for
Dual BIOS
utility

Task menu for
Q-Flash

TM

utility

Dual BIOS utility bar

Q-Flash

TM

utility title

bar

Action bar