GIGABYTE Intel Pentium 4 Processor Motherboard GA-8VM800M - Manual (Page 33)

BIOS Setup - 33 -
English
CPU Hyper-Threading
Enabled Enables CPU Hyper Threading Feature. Please note that this feature is only working
for operating system with multi processors mode supported. (Default value)
Disabled Disables CPU Hyper Threading.
Limit CPUID Max. to 3
Enabled Limit CPUID Maximum value to 3 when use older OS like NT4.
Disabled Disables CPUID Limit for windows XP.(Default value)
2-3 Integrated Peripherals
OnChip IDE Channel0
Enabled Enable onboard 1st channel IDE port.(Default value)
Disabled Disable onboard 1st channel IDE port.
OnChip IDE Channel1
Enabled Enable onboard 2nd channel IDE port.(Default value)
Disabled Disable onboard 2nd channel IDE port.
OnChip Serial ATA
Enabled Enable VT8237R Plus Serial ATA support. (Default value)
Disabled Disable this function.
SATA Mode
RAID Set onboard SATA mode to RAID.
IDE Set onboard SATA mode to IDE. (Default value)
AC97 Audio
Auto Autodetect onboard AC'97 audio function. (Default value)
Disabled Disable this function.
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Integrated Peripherals
OnChip IDE Channel 0 [Enabled]
OnChip IDE Channel 1 [Enabled]
OnChip Serial ATA [Enabled]
SATA Mode [IDE]
AC97 Audio [Auto]
VIA Onboard LAN [Enabled]
USB 1.1 Controller [Enabled]
USB 2.0 Controller [Enabled]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
On-Chip LAN Boot ROM [Disabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Serial Port 2 [2F8/IRQ3]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
Legacy USB storage detect [Enabled]
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level`