Grizzly Model G0562 - Manual (Page 25)

G0562 3 HP Dust Collector -23-
Since all bearings are shielded and permanently
lubricated, simply leave them alone until they
need to be replaced. Do not lubricate them.
Regular periodic maintenance on your Model
G0562 Dust Collector will ensure its optimum per-
formance. Make a habit of inspecting your
machine each time you use it. Check for the fol-
lowing conditions and repair or replace when nec-
essary:
1. Loose mounting bolts.
2. Worn switch.
3. Worn or damaged cords and plugs.
4. Any other condition that could hamper the
safe operation of this machine.
5. Do not let collection bags get completely full.
Disconnect power to the
machine when perform-
ing any maintenance,
assembly or adjust-
ments. Failure to do this
may result in serious
personal injury.
Wear safety glasses dur-
ing the entire mainte-
nance process. Failure
to comply may result in
serious personal injury.
Keep loose clothing
rolled up and out of the
way of machinery and
keep hair pulled back.
Always wear a respira-
tor when changing the
dust collection bags on
the dust collector.
Sawdust may cause
allergic reactions or
respiratory problems.
Always wear a respirator or dust mask and safe-
ty glasses when emptying the collection bags.
Small dust particles can escape the bags during
emptying, causing them to become airborne and
easily inhaled. This microscopic airborne dust is
extremely unhealthy to breathe and can cause
serious health problems.
Grizzly offers replacement collection bags and
canister filters for your Model G0562 Dust
Collector.
Model H5783 Replacement Canister Filter
Model H6899 Replacement Collection Bag
Bag and Canister
Cleaning
Lubrication
General
SECTION 8: MAINTENANCE