Gemini Industries 1SLC805002F0001 - Manual (Page 14)

14 ABB
2
1SLC805010F0001
1SLC805022F0001
1SLC805023F0001
1SLC805026F0001
1SLC805024F0001
1SLC805025F0001
1SLC805064F0001 1SLC805063F0001
Order codes
Components for distribution and mixed applications
The DIN rail is supplied with special
hooks already in position for attaching
to the uprights.
The depth at which the DIN rail, the
modular plates, the kit for fixing the
Tmax circuit breakers and the wiring
duct are positioned can be adjusted
with a simple sliding movement.
In distribution and mixed appli-
cations, the Gemini switchboard
is designed to be fitted with Sy-
stem pro M modular devices
and Tmax moulded-case circuit
breakers.
The frame is the load-bearing
element of the configuration:
DIN rails, partial modular plates
and the special Tmax mounting
and cabling kits are snapped
onto the uprights. All the com-
ponents can be adjusted to six
different depths with a pitch of
12.5 mm and arranged at
heights with a distance of 75
mm between the rows.
Blank or drilled front panels are
applied to protect the equip-
ment and these can be hinged
onto both sides; the cables are
housed inside the vertical wi-
ring duct integrated in the up-
rights according to an exclusive
ABB patent.
Wiring is carried out by pulling
out the frame and working from
the front; the ergonomic grip
and the standard feet and snap-
on hooks supplied make it easy
to insert it inside the switch-
board after the job is finished.
The frame can be extracted to make wiring operations easier at the workbench.
Fixing hooks and feet allow the frame
to be snap-mounted inside the box.
The blank and drilled panels are hinged onto both sides; the description of the
installed components can be kept in the special compartment protected by a
transparent, hinged flange. The upright with the incorporated
wiring duct is an exclusive ABB patent
that rationalizes the path of cables
inside the switchboard.