Graco 7586 User Manual

Page 37

Text mode
Original mode

3.3 Removing and Attaching Base

3.4 Adjusting Handle

To remove infant restraint, squeeze handle at
back of seat and lift infant restraint from base
as shown

➊

To put infant restraint in base, push infant
restraint down until it clicks into base. Pull
up on infant restraint to be sure it is
latched firmly into base.

➊

1. Press handle adjustment buttons on

both sides of handle

➋

2. Rotate handle until it clicks into any

of three positions (for carrying,
reclining, or sitting). BOTH handle
adjustment buttons must pop out
to lock handle in place

➌

3. Push and pull on the handle to be

sure it is locked firmly in position.

➋

➌

Carrying

Reclining

Sitting