Grandstream Networks Security Camera - Manual (Page 10)

Firmware 1.0.0.11 Page 10 of 11
Grandstream Networks, Inc. 08/2009
Configure the GS_NVR to record automatically
1. From GS_NVR, in Device List, right
click on the device from which you
would like to record video stream.
2. Click Modify on the popup menu
to open Modify dialog.
3. In Schedule Settings section, select a schedule.
NOTE: The available schedule you created in Recording Time Schedule will be listed in the
Select a Schedule dropdown list.
4. Click Modify to save all the changes.
Replay Tool
This tool provides the ability to replay the recorded videos. It also provides a search function which
allows you to perform a search based on the start time, end time, IP address, and channel.
Local Configuration
Recording Settings Items
Recording Drives – This section displays the
names, total space and free space of the local
disks. This section also lets you select which
local disks will be used to store recorded video
files. You can also configure the reserve space
for each disk. If multiple disks are chosen, GS_NVR
will start from the first disk until the free space
equals the reserved space, and then go to the
next one.
On Disk Full – When a disk is full, users can
choose to stop all recordings or keep recording
and store them by deleting the oldest
files on the disk.
Split Files per X minutes – Configures the duration of each video recording.
Startup Watchdog – Let’s you to configure whether to run Watchdog. Watchdog is a program that
will watch your GS_NVR for system hang ups and reboot it as needed in your absence.
Select a schedule
GS_NVR – Replay Tool & Local Configuration