Garrett Metal Detectors Master Hunter CX Plus - Manual (Page 16)

www.garrett.com 0 Master Hunter ® CX Plus Owner’s Manual 1
All Metal Mode
Press the All Metal touchpad to activate the All Metal
mode. In this mode the Master Hunter CX Plus will
respond with an increase in sound to the presence
of any metal or conductive mineral target beneath its
searchcoil. For maximum depth and best operation
over highly mineralized ground, always operate in
the All-Metal mode.
Mineralization is automatically balanced (canceled
out) in the All Metal mode by your CX Plus’ Fast
Track ground balancing which is accomplished by
pressing and holding the All Metal touchpad while
scanning the searchcoil for only a few seconds in a
normal manner. When you turn on the CX Plus, wait
until you hear the audible tone that indicates your
detector is operating. Release the touchpad and
continue scanning. Repeat this procedure at any
time to ground balance the CX Plus precisely, no
matter what type of mineralized soil is underneath.
As you search in the All Metal mode, you should oc-
casionally raise the searchcoil, then lower it. If your
audio level changes, readjust the ground balance
with the Fast Track control, according to the above
instructions. Such readjustment will sometimes be
necessary because of the changing concentrations
of ground minerals, especially when you are pros-
pecting in gold country.