GE Monogram ZIS480NX - Manual (Page 2)

For answers to your Monogram, ® GE Profile ™
or GE ® appliance questions, visit our website
at ge.com or call GE Answer Center ® service,
800.626.2000.
110168 Specification Revised 11/08
Listed by
Underwriters
Laboratories
ZIS480NX
GE Monogram ® 48" Built-In Side-by-Side Refrigerator with Automatic
Icemaker and Water Filter
Dimensions and Installation Information (in inches)
White Black Stainless
Models Acrylic Acrylic Steel
ZISW480D ZPW480D ZPS480D
ZISB480D ZPB480D ZPS480D
ZIS480N ZPW480N ZPB480N ZPS480N
Trimmed Refrigerators
ZIS480NXSS, ZISW480DXSS, ZISB480DXSS
Trimmed refrigerators are designed to be customized with
decorative panels. Field-installed custom door and grille
panels are required.
Framed Panels
You may install 1/4"-thick custom panels from your cabinet
manufacturer. The decorative panels slide into the factory-
installed trim. Or, order black, white and stainless steel
accessory panels from your Monogram dealer.
Door Handles
The supplied handles can be adjusted to accommodate both
framed or overlay panels. Custom handles of your choice,
supplied by your cabinet maker, can also be installed. If
desired, you may order ZKHSS2 Monogram stainless steel
tubular handle kit for overlay panels.
Side Panels
Side panels must be used whenever
the sides of the refrigerator will be
exposed. The 1/4" side panels will
slip into the side case trim. Secure
the panels to the refrigerator with
stick-on hook and loop fastener
strips. Order the side panels from
the cabinet manufacturer.
• Cut a notch in the top front corner
as shown to allow clearance for
corner keys in the front side trim.
Standard supplied handles shown in 3/4" overlay panel position.
Standard supplied handles shown in 1/4" panel position.
Framed Panel
605Dia6
696Dia2
3/4" Overlay Panel
.10" Thick Spacer Panel
1/4" Thick Backer Panel
Overlay Panels
You may also choose to install custom overlay panels from
your cabinet manufacturer. This design provides a seamless
appearance which integrates smoothly with surrounding
cabinetry.
Optional Accessory Kit
ZKHSS2: Tubular Stainless Steel handles designed to fit
3/4" overlay panels.
Accessory Panels
White or black acrylic and stainless steel accessory panels
are available from your Monogram supplier. Panels are
cut to size and ready to install. These panel kits must be
ordered separately.
*Depending on installation height.
*84"
2-9/16"
24"
*3" to 4"
3/16"
1-7/8"
Customization Basics: Framed or Overlay Panels, Custom Handles and Accessory Kits