Garrett Metal Detectors Graphic Target Profiling 1350 User Manual

Page 14

Garrett Metal Detectors

1350 is factory preset with the CUSTOM Mode

set the same as the COINS Mode. By using the

ACCEPT / REJECT touchpad, an operator can

modify the Discrimination settings to individual

specifications, which will be retained in the

CUSTOM Mode.

SENSITIVITY

Press the (+) or (-) touchpad to select the desired

SENSITIVITY level, indicated on the Lower Scale

of the LCD panel. The 1350’s Sensitivity setting

can be adjusted from 3 (least sensitive) to 12

(most sensitive).

The default SENSITIVITY setting is set to 9

(approximately 75 percent). It may be necessary

to reduce the SENSITIVITY setting in locations

where abnormal amounts of interference, trash

or other metal detectors are present. In these

situations, reduce the sensitivity until the audio

becomes stable. When searching for very small

or very deep targets it might be beneficial to

increase the sensitivity setting as much as