Grizzly G0476 - Manual (Page 10)

-8-
G0472/G0473/G0476 Sandblasters
To assemble the sandblaster:
1. Install the four legs onto the stand frame with
12 M6-1x20 screws and nuts ( Figure 1).
2. Assemble the hopper assembly, the screen,
and the adhesive foam gasket in the order
shown
( Figure 2) .
Figure 2. Hopper and screen assembly.
3. Set the cabinet onto the hopper and screen
assembly, and secure it with (12) M6-1 x 40
screws and nuts (
Figure 3).
G0472 Assembly 4. Install the lamp and wiring with the M4-0.7 x
10 screws, washers, and nuts. Use the zip-
ties to lock the lamp to the two lamp supports
(
Figure 4) .
5. Insert the air supply hose through the cabinet
grommet, and assemble the gun as shown
(
Figure 5) .
Figure 1. Stand frame.
Figure 3. Cabinet and frame.
Figure 4. Electrical installation.
Figure 5. Gun assembly.