Grizzly H0580 - Manual

Specifications
Air Inlet .................................................... 1 ⁄
4
" NPT
Average Air Consumption ........................ 4 CFM
Operating Pressure .................................. 90 PSI
Capacity ................... 14 oz., (400cc bulk grease)
Weight ........................................3.2 lbs. (Empty)
Inventory (Figure 1) Qty
A.. Grease Gun ............................................... 1
B.. Hydraulic Coupler with Extension .............. 1
Operation
To improve tool lifespan, use a filter/lubricator/
regulator setup, as shown in
Figure 2.
Otherwise, lubricate multiple times daily with 2–3
drops of pneumatic tool oil. Place the oil directly
into the air fitting, as shown in
Figure 3.
Figure 1.. Model H0580.
Figure 3.. Lubricating directly into air fitting.
If you need help with your new pneumatic tool,
call our Tech Support at: (570) 546-9663.
COPyrIGHT © MAy, 2008 By GrIzzLy INduSTrIAL, INC.
WArnIng: nO pOrtIOn OF thIS mAnuAl mAy Be reprOduced In Any ShApe
Or FOrm WIthOut the WrItten ApprOvAl OF grIzzly InduStrIAl, Inc..
#jM10671 PrINTEd IN TAIWAN
eye InJury hAzArd!
Always wear safety glasses
during use to prevent
serious personal injury..
InJury hAzArd!
When servicing, always dis-
connect tool from air to pre-
vent unexpected operation..
150 pSI
mAX AIr preSSure!
exceeding this pSI may
result in injury/tool damage..
Quick
Connector
Quick
Coupler
Air Hose
Quick
Coupler
Quick
Connector Lubricator
Filter
Regulator
Air
Compressor
Your
Tool
Figure 2.. Installing a filter/lubricator/regulator to
improve the lifespan of your tool.
mOdel h0580
pneumAtIc greASe
gun
InStructIOn Sheet
Hydraulic Coupler Extension
Head
Assembly
Cartridge Body