Gefen GTB-MHDMI1.3-441 - Manual (Page 14)

11
IR REMOTE CONTROL UNIT OPERATION
The RMT-4IR remote control will allow selecting the source to display on the
output. Each button on the remote control corresponds to one of the of four
source inputs. Please use the information below when selecting the desired
source:
Table of IR Remote Commands
for the GefenToolBox 4x1 Switcher for HDMI
RMT-4IR Source
1 1
2 2
3 3
4 4
RMT-4IR button Source
3 3
Example: In the above example, if button 3 on the RMT-4IR remote control is
pressed, the source connected HDMI In 3 will be routed to the Display device.