Gefen DL - Manual (Page 9)

5
1 Power
This LED will glow bright red once the included 5V DC locking power supply has
been connected and plugged into an available electrical outlet.
2 IR Sensor
Receives IR commands from the included IR Remote Control Unit.
3 Source Selection Indicators
These LED indicators will glow bright blue depending upon which input source is
selected. Use the Select button to select the input source.
4 Select
Press this button to toggle between DVI In 1/ USB In 1 and DVI In 2 / USB In 2.
5 5V DC
Connect the included 5V DC power supply to this connector.
6 Audio In 1 / Audio In 2
Connect the included 3.5mm mini-stereo cables from each computer / audio
source to each of these 3.5mm mini-stereo jacks.
7 DVI Out
Connect a DVI cable from the extender to an HDTV display.
8 Audio Out
Connect a 3.5mm mini-stereo cable from this jack to the audio/video output
device.
9 DVI In 1 / DVI In 2
Connect the included DVI cables from each computer source to each of these
DVI connectors.
10 Remote
Used for contact-closure control. See page ## for details.
11 USB Out
Connect up to two USB device to these USB ports. Both of these USB ports are
active, depending upon the USB inputs.
12 USB In 1 / USB In 2
Connect the included USB cables from each computer source to these USB
ports.
PANEL DESCRIPTIONS