Gefen DL - Manual (Page 17)

13
OPERATING THE 2X1 DVIKVM DL SWITCH
Using the IR Extender (not included)
1. On the bottom of the 2x1 DVIKVM DL Switch, locate the DIP switch bank
and set DIP switch 4 to the ON position.
2. Connect the IR Extender to the Remote jack on the 2x1 DVIKVM DL Switch.
3. Point the IR Remote Control unit at the IR Extender to control the 2x1
DVIKVM DL Switch.
Set DIP 4 to the ON
p position