Grizzly G0700 - Manual (Page 4)

-2-
Model g0700 (Mfg. since 8/09)
introduction
the Model g0700 is designed as an alternative
option to a traditional cabinet saw. this saw is
capable of both through and non-through cutting
operations, similar to a traditional cabinet saw, but
has a sliding table available to assist with cross-
cuts or angled cuts that would otherwise require a
jig or crosscut sled to cut safely.
a scoring blade is included with the Model g0700.
it may or may not be used, depending on if the
workpiece is faced with laminate, melamine, or
other solid surface material, or if tear-out free cuts
are required. if the scoring blade is not needed
for cutting operations, it can be lowered under the
table so it will stay sharp for later operations.
in order to produce accurate results, the slid-
ing table must move parallel to the blade and
the scoring blade must be aligned with the main
blade.
machine description
We stand behind our machines. If you have any
service questions, parts requests or general ques-
tions about the machine, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
E-Mail: [email protected]
We want your feedback on this manual. If you can
take the time, please email or write to us at the
address below and tell us how we did:
Grizzly Industrial, Inc.
C /
O
Technical Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: [email protected]
contact info
We are proud to offer this manual with your new
machine! We've made every effort to be exact
with the instructions, specifications, drawings,
and photographs of the machine we used when
writing this manual. However, sometimes we still
make an occasional mistake.
Also, owing to our policy of continuous improve-
ment,
your machine may not exactly match the
manual. If you find this to be the case, and the dif-
ference between the manual and machine leaves
you in doubt, check our website for the latest
manual update or call technical support for help.
Before calling, find the manufacture date of your
machine by looking at the date stamped into the
machine ID label (see below). This will help us
determine if the manual version you received
matches the manufacture date of your machine.
For your convenience, we post all available man-
uals and manual updates for free on our website
at
www.grizzly.com. Any updates to your model
of machine will be reflected in these documents
as soon as they are complete.
Manufacture Date
of Your Machine
manual accuracy