Grizzly MINI GRINDER KIT G8601 - Manual (Page 5)

G8601 Mini Grinder Kit -5 -
ADDITIONAL SAFETY INSTRUCTIONS
FOR GRINDERS
1. KEEP HANDS AWAY FROM
ROTATING PARTS.
Never attempt
to adjust or stop a tool which has
been mounted on the grinder shaft
when the tool is turning.
2. HOLD THE TOOL FIRMLY. Always
brace yourself against the rotational
force of the turning shaft to avoid
slipping the tool and possibly caus-
ing cuts or abrasions.
3. NEVER USE WATER OR OTHER
LUBRICANTS
with the grinding
tools in this kit. Moisture greatly
increases the risk of a shock haz-
ard.
4. WATCH OUT FOR FLYING
SPARKS.
Hold the tool so that any
sparks created will fly in the oppo-
site direction from you or other flam-
mable materials.
5. DO NOT TOUCH THE WORK-
PIECE IMMEDIATELY AFTER
OPERATION.
The workpiece sur-
face will be hot from the grinding
process and may burn your skin.
6. BEFORE APPLYING ONE OF
THE ACCESSORY TOOL HEADS
TO THE WORKPIECE,
run the tool
freely for a minute or two and check
to be sure there is no wobble or
excessive vibration.
7. ONLY USE GRINDING WHEELS
which have been rated for an oper-
ating speed which is equal to or
greater than the highest speed of
this tool.
8. WHEN USING GRINDING
WHEELS
, always check the wheel
for cracks or other damage. Never
use a wheel with signs of damage
as it could fly apart during the grind-
ing process and cause injury.
9. ALWAYS UNPLUG THE TOOL
WHEN NOT IN USE.
Operating this equipment has the
potential to propel debris into the air
which can cause eye injury. Always
wear safety glasses or goggles when
operating equipment. Be certain the
safety glasses you wear meet the
appropriate standards of the
American National Standards
Institute (ANSI).