Global Machinery Company RM1000 - Manual (Page 3)

3
Description of symbols
The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulated for additional protection.
Conforms to relevant standards
for electromagnetic compatibility.
Use at a distance of at least 5m from
other people.
If cordset is damaged remove it from the
plug immediately and have it replaced by an
authorised service centre.
Do not use in the rain.
Thrown objects and rotating line can
cause severe injury.
Sharp blade.
Warning.
Read these instructions for use carefully.
Specifications
Voltage: 230-240Vac ~ 50Hz
Input power: 1000W
No load speed: 7500 min -1
Cut diameter (swathe): 380mm
Line thickness: 2.0mm
Spool type: Bump Feed
Secondary handle: Yes
Tool weight: 4kg
Introduction
Your new GMC power tool will more than satisfy
your expectations. It has been manufactured under
stringent GMC Quality Standards to meet superior
performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way.