GE G2 - Manual (Page 78)

74 74
Reset Settings
Use this setting to restore the camera to its
default settings.
1. Select the Reset setting from the Setup
menu as described previously.
2. Use the Up/Down navigation buttons
to select Yes or No. Then press the
EXWWRQWRFRQ½UP
FW Ver. (Firmware version)
Use this setting to view the current camera
½UPZDUHYHUVLRQ
1. Select the FW Ver. setting from the Setup
menu as described previously.
2. If SD card contains a new version of
½UPZDUHSOHDVHXSJUDGHDFFRUGLQJO\DV
necessary.