Stovax PR0731 - Manual (Page 15)

15
INSTALLATION INSTRUCTIONS
COMMISSIONING
Each of the four switches can be set to either one of two
positions, in any combination.
To re-code the handset:
• Change the combination of how the DIP switches are set,
Diagram 12
12
AR1936
Once the handset has a new code the control box needs to
be reprogrammed:
To access the control box see Servicing Instructions, Section
11 - Control Box.
• Press and hold the reset button on the control box until
you hear two signals. After the second longer signal:
• Release the reset button and within 20
seconds press the DOWN button on the
handset until you hear an additional long signal
confirming the new code
5. COMMISSIONING
5.1 Complete the Commissioning Checklist at the front of this
manual covering:
• Flue checks
• Gas checks
5.2 In the unlikely event that the appliance is receiving
interferece from other electronic devices, re-programme the
handset/Control box