GE 29484GE2 - Manual (Page 8)

Attaching the Desktop Pedestal
1. Turn the phone over so that the bottom of the base is facing up and the thickest
end is pointing away from you.
2. Turn the desktop pedestal so that the flat side is facing upwards.
3. With the rounded end of the pedestal pointing upward, insert the tabs on the
thickest end of the pedestal onto the two upper slots on the bottom of the base,
then push the pedestal forward until the tabs on the thinnest end of the pedestal
snap (lock) into place.
Attaching the Wall Mount Pedestal
1. Turn the phone over so that the bottom of the
base is facing up and the thickest end is pointing
away from you.
2. Turn the mounting pedestal so that the flat side is
facing upwards.
3. Thread the telephone line cord through the groove
on the thin end of the pedestal.
4. With the thin end of the pedestal pointing upward, insert the tabs on the rounded
edge of the pedestal into the two lower slots on the bottom of the base, then push
the pedestal down until all of the tabs snap into place.
IMPORTANT: To mount the phone on the wall, slip the mounting
circles on the pedestal over the wall plate posts and firmly slide the
unit down into place.
Adaptor/
coupler on LINE
1+2
Groove