Inventory – Grizzly G4179 User Manual

Page 13

Model g4179

⁄

hp power Feeder

-11-

inventory

the following is a description of the main compo-
nents shipped with your machine. lay the compo-
nents out to inventory them.

Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.

box inventory (Figures 3 & 4)

Qty

a. power Feeder assembly ............................ 1

b. Extra 26/34-tooth gears (Behind Cover) .....

..............................................................1 Ea

c. Elbow Joint assembly ................................ 1

D. Base and Column assembly ...................... 1

E. Crank and leadscrew assembly ................ 1

F. Base Bolt pattern template ........................ 1

G. pointed set screws M8-1.25 x 12 .............. 3

H. hex Wrench 4mm ....................................... 1

i. handcrank handles .................................... 2

J. Flat Washer 13mm ..................................... 1

K. t-handle ..................................................... 1

L. horizontal Column assembly ..................... 1

SuFFOcatiON HazaRD!

immediately discard all plas-

tic bags and packing materi-

als to eliminate choking/suf-

focation hazards for children

and animals.

if any nonproprietary parts are missing (e.g. a

nut or a washer), we will gladly replace them; or

for the sake of expediency, replacements can be

obtained at your local hardware store.

Figure 3. power feeder inventory.

Figure 4. Base inventory.