Notice, Operation safety, Basic controls – Grizzly G9922 User Manual
Page 21
g9922 (mfg. since 12/01)
-21-
SECTION 4: OPERATIONS
Damage to your eyes and lungs could result
from using this machine without proper pro-
tective gear. Always wear safety glasses and
a respirator when operating this machine.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLy REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
Operation Safety
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
To reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.
basic Controls
use the descriptions and figures below to become
familiar with the basic controls of your machine.
ON/Off Switch:
turns machine ON/OFF.
Table Tilt Lock Knob:
Frees/locks the table tilt.
figure 20.
Basic controls.
Miter Gauge:
allows workpiece sanding at spe-
cific angles. ideal for sanding straight edges on
miter-cut workpieces.
Miter Gauge Lock Knob:
locks the miter gauge
at the current angle.
on/oFF switch
table tilt lock Knob (x2)
figure 21.
Miter gauge controls.
Miter gauge
Miter gauge lock Knob