Graco NAUTILUS PD101777B - Manual (Page 47)

47
15.0 Adjusting Head Support
When using with or without the built-in
harness.
BEFORE adjusting the head support height,
have your child lean forward slightly.
Squeeze the red adjustment handle
™ on
top of seat and pull back support up until it
snaps into one of the 5 height positions.
To lower, squeeze red adjustment handle
and push down.
CHECK to make sure it is securely snapped
into one of the 5 height positions by pulling
up on head support.
The shoulder belt guides must be even with
or just above the shoulders as shown by
dotted line
š .
™
š