beautypg.com

Global Machinery Company REDEYE LSSLV User Manual

Page 4

background image

LSSLV Self Leveling

Vertical Line Generator

Safety rules for self leveling vertical line generators

The self leveling vertical line generator is Class 2 with maximum 1mW and

635 - 650nm wavelengths. These lasers do not normally present an optical

hazard, although staring at the beam may cause flash blindness.

Warning.

Do not stare directly at the laser beam.

A hazard may exist if you deliberately stare into the beam, please observe

all safety rules as follows;

The laser shall be used and maintained in accordance with the

manufacturer’s instructions.

Never aim the beam at any person or an object other than the work piece.

The laser beam shall not be deliberately aimed at personnel and shall be

prevented from being directed towards the eye of a person for longer than 0.25s.

Always ensure the laser beam is aimed at a sturdy work piece without

reflective surfaces. I.e. wood or rough coated surfaces are acceptable.

Bright shiny reflective sheet steel or the like is not suitable for

laser use as the reflective surface could direct the beam back at

the operator.

Do not change the laser light assembly with a different type.

Repairs must only be carried out by the laser manufacturer or

an authorised agent.

CAUTION:

Use of controls or adjustments or performance

of procedures other than those specified herein may result

in hazardous radiation exposure.
Please refer to the relevant Australian standards, AS 2397

and AS/NZS2211 for more information on Lasers.

Additional safety rules for self leveling vertical line

generators

The self leveling vertical line generator emits a laser fan beam, which acts

like an invisible surface in the actual three dimensions space. When used

indoors, it generates a visible laser line on the surfaces the laser fan beam

crosses.
The self leveling vertical line generator is a Class 2 laser tool and complies

with Australian standards, AS 2397 and AS/NZS2211.

WARNING.

Read and understand all instructions. Failure to follow all

instructions may result in hazardous radiation exposure, electric shock, fire

and/or bodily injury.

Do not remove or deface any labels. Removing labels increases the risk of

exposure to laser radiation.

Do not stare directly at the laser beam as serious eye injury could result.

Do not project the laser beam directly into the eyes of others.

Do not place the laser in a position which may cause anyone to stare

into the laser beam intentionally or unintentionally.

Do not use optical tools such as a telescope or transit to view the laser

beam.

Do not operate the self leveling vertical line generator around children or

allow children to operate the tool.

Keep children and bystanders away while operating the self leveling

vertical line generator.

7

6