Grizzly 12" Drum Sander G0459 - Manual (Page 41)

Model G0459/G0459P (Mfg. 7/11+)
-39-
figure 43. drum sander disassembled
to Step 8.
9. remove the sanding drum (4 lock nuts and 4
flat washers) and v-belt ( figure 44).
7. remove the rear panel.
8. loosen the hex bolts securing the motor
bracket to the frame, raise the motor and
remove the v-belt from the motor pulley (see
Page 31 for help). the drum sander should
now look similar to
figure 43.
neW
photo
figure 42. rear pressure roller components.
6. remove the rear pressure roller (4 hex bolts
and 4 flat washers) along with the brack-
ets, compression springs, and spring plates
shown in
figure 42.
neW
photo
figure 44. location to remove sanding drum
components.
spring
plate
Compression
spring
figure 45. drum sander disassembled
to Step 10.
10. remove the front roller end guard covers (4
phillip head screws) and the rear roller end
guard covers (4 phillip head screws), and set
the covers aside. the drum sander should
now look similar to
figure 45.
bracket