Grizzly Industrial Inc. Extreme-Duty Planners G9961 - Manual (Page 13)

extreme duty planers -11-
piece inventory
after all the parts have been removed from the
carton, you should have:
g9740/g9741/g9967 (4-Knife cutterheads)
part Qty
• planer unit 1
• dust hood 1
• Combo Wrench 11x13 1
• Combo Wrench 12x14 1
• Combo Wrench 17x19 1
• hex Wrench 5mm 1
• Knife Setting Jig 1
g9740z/g9961/g9967z (spiral cutterheads)
part Qty
• planer unit 1
• dust hood 1
• t-20 torx ® driver 1
• misc. bag of t-20 driver bits 1
• misc. bag of t-20 Flat Screws 1
• pressure gauge 1
• reducing valve 1
• bracket 1
• Steel rod (handle) 1
• reversible air Screwdriver 1
• phillips bits 2
• air Coupler 1
• replacement Carbide inserts 10
in the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.