Grizzly H3390 - Manual (Page 23)

-18- H3390 Wet Tile Saw
SECTION 6: MAINTENANCE
General
Regular periodic maintenance on your Model
H3390 will ensure its optimum performance.
Make a habit of inspecting your machine each
time you use it.
Check for the following conditions and repair
or replace when necessary:
1. Conditions allowing prolonged exposure of
the motor and electrical components to
water.
2. Loose mounting bolts.
3. Worn switch.
4. Worn or damaged cords and plugs.
5. Damaged V-belt.
6. Any other condition that could hamper the
safe operation of this machine.
7. Inspect blades for damage.
8. Guard alignment and operation.
Disconnect power to the
machine when perform-
ing any maintenance on
the table saw. Failure to
do this could result in
serious personal injury.
!
Loose hair and clothing
could get caught in
machinery causing seri-
ous personal injury.
Keep loose clothing
rolled up and long hair
tied up and away from
machinery.
Projectiles thrown from
the machine could cause
serious eye injury. Wear
safety glasses during
assembly.