Graco 8482 - Manual (Page 43)

43
6.2 Securing Your Child and the
Booster Seat with the Vehicle
Lap/Shoulder Belt
1. Use of the tether is not required when using the
seat in this mode; however, it may keep the
seat more stable. See pages 14 and 33 for
instructions on tether use.
2. Place booster seat firmly against the back
of a forward-facing vehicle seat suitable for
the booster seat as explained in section 4,
“Selecting a Suitable Location for the Car
Seat” (page 14) and equipped with a lap/
shoulder belt. DO NOT place booster seat in a
seating position that only provides a lap belt.
If a front passenger seat is used, slide the
vehicle seat rearward as far as possible from
the dashboard.
3. Be sure that the vehicle seat back is locked
in position.
4. Have your child sit in the seat so that the
child’s bottom rests against the back of the
booster seat.