GE 21025/26 - Manual (Page 45)

45
A
CCESSING THE
A
NSWERING
S
YSTEM WITH THE
C
ORDLESS
H
ANDSET
M
ESSAGE
P
LAYBACK
1. Make sure your handset is in standby mode.
2. Press the exit/answerer button to access the answering system. The
display shows ANSWERER REMOTE ACCESS.
3. Press the play/stop button to play messages, or press exit/answerer
button to return to standby mode.
When you are playing a message, you may do the following:
a) Press play/stop/2 key to stop message playback.
b) Press review/1 key once to re-play the current message.
c) Press review/1 key twice to review previous messages.
d) Press skip/3 key to skip to the next message.
e) Press erase/0 key to erase the current message.
f) Press 4 key to turn the answering system on or off.
4. When you finish reviewing your messages, press the play/stop button to
stop message playback, and then press the exit/answerer button to exit
the
ANSWERER REMOTE ACCESS mode.
A
CCESSING THE
A
NSWERING
S
YSTEM
F
ROM
A
NOTHER
L
OCATION
You can access your answering system from any touch-tone phone by
entering your 3-digit security code after you hear the outgoing
announcement.
1. Dial the phone number to which the answering system is connected.
2. When the answering system answers your call, enter the security code
after you hear the tone.
3. Follow the voice menu to use the answering system’s remote functions.
TIP: During remote access you may bypass the outgoing announcement by
pressing any number key on the touch-tone pad while the announcement is
playing. Then, enter your security code to access the answering system.