GE 21025/26 - Manual (Page 17)

17
1. Press the mute/program button and HOLD BASE PAGE WAIT FOR BEEP
shows in the display.
2. Press and hold the page button on the base until you hear a long beep
and the handset displays HANDSET # REGISTERED.
3. When handset registration is complete, you may name the handset.
ENTER NAME shows in the display. Repeat step 1 through step 3 in the
Handset Name section.
NOTE: If the handset was registered previously and a name assigned, the
name automatically displays after a successful re-registration.
To re-register a handset:
1. Press the mute/program button until REGISTRATION 1YES 2NO shows
in the display.
2. Use the touch-tone pad on the handset or the cid/vol ( or ) button to
select 1YES. The default setting is 2NO.
HOLD BASE PAGE
WAIT FOR BEEP
HANDSET 1
REGISTERED
HANDSET NEEDS
REGISTRATION
REGISTRATION
1 YES 2 NO