GTO SL-1000 - Manual (Page 11)

8
These warning labels should be found at the locations specified below. If any of them are missing, immediately
contact your installer for replacements.
Continued from page 7
• Fingers, hands, and
loose clothing may be
dragged into chain
sprockets.
• Fingers and hands can
be injured by rotating
sprockets.
• Keep hands, fingers,
and loose clothing
away from chain and
sprockets.
WARNING
!
• Adjusting limit switches with power on will
activate gate.
• Injury may result if fingers get caught under
switch plate while adjusting switches.
• Use extreme caution when adjusting switches.
WARNING !
• Fingers, hands, and loose clothing
may be dragged into chain sprockets.
• Fingers and hands can be injured by
rotating sprockets.
• Keep hands, fingers, and loose clothing
away from chain and sprockets.
WARNING !
warning label located
on limit switch plate
1. KEEP CLEAR! Gate may move at any time.
2. Do not allow children to operate gate or
play in gate area.
3. This gate is for vehicles only. Pedestrians
must use a separate entrance.
Moving Gate Can Cause
Injury Or Death
WARNING !
warning signs (2) to be installed on each side of the gate
(3–5 feet above the bottom of the gate)
warning sign located (inside housing)
over the top sprocket at back of operator
warning label located (inside housing) next to
sprockets on back of operator
IMPORTANT SAFETY INSTRUCTIONS