FUJITSU C2330 User Manual

Page 13

Table 5: Fields, Options and Defaults for the Port Configuration Submenu of the Advanced Menu

Menu Field

Options

Default

Description

Serial Port:

• Disabled
• Enabled
• Auto

[Enabled]

When [Enabled] is selected, the port is on. When [Dis-
abled] is selected, the serial port is turned off. When [Auto]
is selected, the Plug & Play feature configures the port.
Note that for systems running Windows XP, this legacy
port is not supported without additional device-specific
drivers.

I/O Address:

• 3F8 - 3FF
• 2F8 - 2FF
• 3E8 - 3EF
• 2E8 - 2EF

[3F8 - 3FF]

Select the I/O address for the serial port.
(Note that if there is a conflict between the port interrupts
or addresses, asterisks will appear adjacent to the affected
port names to alert you to the fact. In that case, make a
different selection.)

Interrupt:

• IRQ 3
• IRQ 4
• IRQ 10
• IRQ 11

[IRQ 4]

Allows user to set the infrared port base I/O address when
the serial port is Enabled.
(Note that if there is a conflict between the port interrupts
or addresses, asterisks will appear adjacent to the affected
port names to alert you to the fact. In that case, make a
different selection.)

Infrared Port:

• Disabled
• Enabled
• Auto

[Enabled]

When Disabled, the infrared port is off; when Enabled, the
infrared port is on. When Auto is selected, the Plug & Play
operating system configures the port.

Mode:

• IrDA
• FIR

[FIR]

Select the mode for the infrared port: Infrared or Fast Infra-
red.

I/O Address:

• 3F8 - 3FF
• 2F8 - 2FF
• 3E8 - 3EF
• 2E8 - 2EF

[2E8 - 2EF]

Allows user to set the infrared port base I/O address when
the infrared port is Enabled.

(Note that if there is a conflict between the port interrupts
or addresses, asterisks will appear adjacent to the affected
port names to alert you to the fact. In that case, make a
different selection.)

Interrupt:

• IRQ 3
• IRQ 4
• IRQ 10
• IRQ 11

[IRQ 3]

Allows user to set the infrared port interrupt when the
infrared port is Enabled.

A d v a n c e d M e n u