FieldServer FS-8700-84 - Manual (Page 39)

FS-8700-84_Lutron_eLumen Driver Manual Page 36 of 36
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]
Appendix B. Revision History
Date Resp Format
Driver
Ver. Doc.
Rev.
Comment
05/10/02 1.00 0 Initial version
06/27/02 1.00 1 Updated with awt Map Descriptor function
06/28/02 1.00 2
Updated get_names function using one
ars Map Descriptor
08/14/02 1.00 3
Updated switch status and wallstation
status mapdesc descriptions. Added
length column to all mapdesc examples.
09/23/02 1.01 0 Added stop scene ramp down command.
12/31/02 1.02 0
Added request panel emergency status
command.
03/18/02 1.03 0 Updated max area number to 511
08/20/03 1.03 1 Releasing
11/07/03 1.03 2
DUR0262, removed extra rows in Select
Scene in Area data setup table.
10/20/04 Meg Meg 1.03 3
Major manual reformat – DUR0479
Changed document name – DUR0468.
Updated Description – 0469
Added RS-485 functionality – DUR0481
11/11/04 Meg Meg 1.04 0
Changed protocol and description name
to ELUMEN. Some formatting updates.
DUR0468
11/12/04 Meg Meg 1.04 1
Further changes as sanctioned by DR.
Connection diagram updated to show
correct adapter, wire list tidied up. Info
on RS-485 connection requested from
DR.
12/17/04 Meg Meg 1.04 2
Connection drawings updated according
to data from customer and comments
from Mac. Formatting and common
documentation errors eliminated.
1/6/05 JD 1.04 3 Releasing