Multi channels idle display setup, Multi-channel idle display – First Alert Wireless 4GB Security System DWS-472 User Manual
Page 21
Page 21
Multi Channels Idle Display Setup Menu
Select SYSTEM SETUP, press
MENU to enter. Use
to select MULTI CHANNELS IDLE DISPLAY.
Use
to highlight DISPLAY QUAD DURING IDLE / AT 5 SEC INTERVALS / AT 10 SEC
INTERVALS / AT 15 SEC INTERVALS. Press MENU to confirm selection. Press ESC to save and exit.
NOTE: (1) Camera ON/OFF setting in CAMERA SETUP section will affect which camera(s) can be
displayed during IDLE DISPLAY. (2) Audio (single channel at anytime) will be available during QUAD mode
(by default on channel 1 or the next available channel with camera paired to system), single FULL screen
mode (auto switch to channel viewing at the time), or channel triggered by motion. (3) Audio channel will
stay connected until channel switched. (4) If set to 5/10/15 sec. interval then select SCAN ACTIVATED
CAMERAS to achieve this display mode.
Idle Display - 15 Seconds
Idle Display - QUAD
Idle Display - 5 Seconds
Idle Display - 10 Seconds