Setup masking area, Record time, Setup mask area – First Alert Wireless 4GB Security System DWS-472 User Manual
Page 16
Page 16
This screen allows you to setup areas where you do not want motion to be detected. Use
to select
MASKING AREA SETUP menu. Use
to highlight camera (1-4) for setup. Use
to navigate
to the grid where no motion detection is desired. Press
MENU key to toggle between mask/unmask
grid(s). Movements taking place inside masked area will be ignored. Continue selecting another grid for
setup or press ESC to save and exit.
Use this menu to set the amount of time you want to record
after motion is detected. Use
to highlight recording
period: 2 Min / 5 Min / 10 MIN, press
MENU to confirm.
Press ESC to save and exit.
Masking Area Setup Grid
Recorder Setup-Record Time
Masking Area Setup Menu
m
icro
SD
c
arD
c
apacity
640
x
480 (Vga)
1GB
200 Minutes (8.3 hours)
2GB
400 Minutes (16.6 hours)
8GB
1,600 Minutes (66.7 hours)
16GB
3,200 Minutes (133.3 hours)
32GB
6,400 Minutes (266.7 hours)
CARD
CAPACITIES
RECORDING TIME FOR
MEMORY CARDS
Note: All numbers are approximate and
are for estimating only. Many factors
influence actual storage capacities
including size of data, quality, aspect
ratio and compression used.