Kenwood KDC-5070R - Manual (Page 32)

English
— 32 —
Connecting Cables to Terminals
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
P.CONT
ANT.C
TEL MUTE
Connector Function Guide
Pin Numbers for
ISO Connectors
Cable Colour Functions
External Power
Connector
A–4
A–5
A–6
A–7
A–8
Speaker
Connector
B–1
B–2
B–3
B–4
B–5
B–6
B–7
B–8
Yellow
Blue/White
Orange/White
Red
Black
Purple
Purple/Black
Gray
Gray/Black
White
White/Black
Green
Green/Black
Battery
Power Control
Dimmer
Ignition (ACC)
Earth (Ground)
Connection
Rear Right ( + )
Rear Right ( – )
Front Right ( + )
Front Right ( – )
Front Left ( + )
Front Left ( – )
Rear Left ( + )
Rear Left ( – )
KENWOOD disc changer
/ DAB control input
Battery cable (Yellow)
Ignition cable (Red)
FM/AM antenna input Antenna Cord (ISO)
Antenna Conversion Adaptor (ISO–JASO) (Accessory3)
To connect the Disc
changer or DAB unit,
consult each manual.
NOTE
To connect the KENWOOD
navigation system, consult
your navigation manual.
NOTE
Wiring harness
(Accessory1)
If no connections are made,
do not let the cable come
out from the tab.
Power control/ Motor
antenna control
cable (Blue/White)
TEL mute cable (Brown)
Connect either to the power
control terminal when using the
optional power amplifier, or to
the antenna control terminal in
the vehicle.
Connect to the terminal that is
grounded when either the
telephone rings or during
conversation.
A–7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
Fuse (10A)
Rear left output
(White)
Front left
output (White)
Front right
output (Red)
Rear right
output (Red)