Kenwood KDC-5070R - Manual (Page 26)

Function of the KDC-6070R
This function permits the graphic display to be switched to one
that is linked with the volume level value or to display various
modes. The initial setting is ON (displaying various modes).
Turning the Graphic Display On/Off:
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the Switching Graphic
Display function appears in the display.
Press the
4 button to search in the other direction.
The function setting is indicated by " GRAP ON" or "GRAP OFF"
in the display, indicating that the Graphic display is on or off,
respectively.
"GRAP ON" (The graphic display works.)
"GRAP OFF" (The graphic display does not work.)
2
1
Switching Graphic Display
Function of the KDC-5070R
This function permits switching the clock display on/off when
switching the display during each of the modes.
Turning the Clock Display On/Off:
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the Switching Clock
Display function appears in the display.
Press the
4 button to search in the other direction.
The function setting is indicated by " CLK ON" or "CLK OFF" in
the display, indicating that the Clock Display function is on or
off, respectively.
Switching settings
Press either the AM button or FM button .
The display and setting will change.
Press the MENU button to end the menu mode.
4
3
2
1
Switching Clock Display
Adjust various parameters of sound quality.
Press the AUD button to enter the control mode.
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change as follows:
Pressing the FM button advances the display, and pressing the
AM button reverses it.
Source tone memory
Each source (CD, FM, AM, and disc changer) has its own memory
in which to store the bass and treble tone settings.
The settings made for a particular source are then recalled
automatically whenever you use that source (e.g., FM mode uses
the tone settings made for FM, AM for AM, etc.).
Press the 4/¢ button.
Look at the table to adjust the mode being displayed.
Press the AUD button to end the control mode.
4
Adjustment
mode
(Display)
Bass ("BAS")
Treble("TRE")
Balance("BAL")
Fader ("FAD")
Bass decreased.
Treble decreased.
Bass increased.
Treble increased.
4 button ¢ button
Operation of Audio control button
Front channel increased. Rear channel increased.
Right channel emphasized. Left channel emphasized.
3
NOTE
Bass
Treble Balance
Fader
2
1
Audio Control Setting
Other features
— 26 —
English