FRIGIDAIRE 242063600 - Manual (Page 14)

14
CAUTION
Chemicals from a malfunctioning water softener
can damage the ice maker. If the water supply to
your refrigerator is softened, be sure the softener is
maintained to work properly.
CAUTION
NEVER use an ice pick or similar sharp instrument to
break up the ice. This could damage the ice storage bin
and dispenser mechanism.
IMPORTANT
When removing or replacing the ice bin, DO NOT rotate
the auger in the ice bin. If the auger is accidentally
rotated, you must realign the auger by turning it in
90 degree turns (see below) until the ice bin fits into
place with the drive mechanism. If the auger is
not properly aligned when replacing the ice bin, the
refrigerator will only dispense Crushed Ice. The freezer
door may also not close properly causing warm air to
leak into the freezer.
AUTOMATIC ICE & WATEr DISPENSEr (CONTINUED)
Ice Maker/Dispenser Tips
• Ice cubes stored too long may develop an odd
flavor. Empty the ice container as explained below.
• Occasionally shake the ice container to keep ice
separated.
• If your refrigerator is not connected to a water
supply or the water supply is turned off, turn off
the ice maker by pressing the On/Off switch.
• If you need a large quantity of ice at one time, it is
best to get cubes directly from the ice container.
• The following sounds are normal when the ice
maker is operating:
- Motor running
- Ice dropping into ice container
- Water valve opening or closing
- Ice loosening from tray
- Running water
• When dispensing ice, you will hear a snapping
or clicking sound when the ice chute opens and
closes.
• Turn off the ice maker when cleaning the freezer
and during vacations.
- If you turn off the ice maker for a long period of
time, you should also turn off the water supply
valve.
Cleaning the Ice Maker
Clean the ice maker and ice bin at regular intervals,
particularly before you take a vacation or move.
To clean the ice maker:
1 Turn off ice production by pressing the ice maker’s
Off/On switch.
2 Remove the ice bin by lifting up and out.
3 Empty and carefully clean the ice bin with mild
detergent. Rinse with clear water. Do not use harsh
or abrasive cleaners.
4 Allow the ice bin to dry completely before replacing
in the freezer.
5 Remove ice chips and clean the ice bin shelf and
the freezer door chute.
6 Replace the ice bin. Press the ice maker’s Off/On
switch to resume ice production.
remove and empty the ice storage bin if:
• An extended power failure (one hour or longer)
causes ice cubes in the ice storage bin to melt and
freeze together, jamming the dispenser mechanism.
• You do not use the ice dispenser frequently. Ice
cubes will freeze together in the bin, jamming the
dispenser mechanism.
Remove the ice storage bin and shake to loosen the
cubes or clean as explained above.