Precision setting (for the u model), E-23), E-23 – FUJITSU plasmavision User Manual
Page 37
E-23
Engli
s
h
Deutsch
Es
pa
ñol
Fran
ç
ai
s
It
al
iano
Por
tugu
ê
s
日
本 語
Pус
с
к
и
й
中文
• See BASIC PROCEDURE OF ADJUSTMENT MENU OPERATIONS on page E-20.
Even more advanced Sharpness adjustments can be made as required.
Adjusting the Black Level
Press
F
to strengthen the reproduction of black. (Provides a picture quality with deep blacks.)
Press
E
to weaken the reproduction of black.
Press
<
to store.
Setting Detail Gradation
Corrects the gradation of the light and dark areas of the picture.
Each time
E
or
F
is pressed, the setting is switched.
On < Off
Press
<
to store.
Setting 3D NR
This enables noise reduction processing with respect to the input signal noise level (reduces screen
flicker for more comfortable viewing).
Each time you press
E
or
F
, the available choices appear in the following sequence.
Press
<
to store.
Setting CODEC NR
This enables noise reduction processing of mosquito noise or block noise generated when digital picture
signals are recorded or replayed.
Each time you press
E
or
F
, the available choices appear in the following sequence.
Press
<
to store.
PRECISION SETTING (for the U model)
Precision Setting Selection
Screen
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
MHD01661-02_E.book 23 ページ ２００４年１２月２２日 水曜日 午後５時１５分