Adjusting the picture, E-21), E-21 – FUJITSU plasmavision User Manual
Page 35
E-21
Engli
s
h
Deutsch
Es
pa
ñol
Fran
ç
ai
s
It
al
iano
Por
tugu
ê
s
日
本 語
Pус
с
к
и
й
中文
ADJUSTING THE PICTURE
• Picture-related items can be set and adjusted in the Picture Adjustment Screen. See BASIC PROCEDURE OF ADJUSTMENT MENU
OPERATIONS on page E-20 for the basic operation procedures.
Adjusting the Signal Contrast
Press
F
to increase the input signal contrast.
Press
E
to reduce the input signal contrast.
Press
<
to store.
Adjusting the Drive Contrast
Press
F
to raise the display’s luminance level, and increase the contrast.
Press
E
to lower the display’s luminance level, and reduce the contrast.
Press
<
to store.
Adjusting the Brightness
Press
F
to increase the brightness.
Press
E
to reduce the brightness.
Press
<
to store.
Adjusting Color
Press
F
to darken the color.
Press
E
to lighten the color.
Press
<
to store.
Adjusting the Tint
Press
F
to change the tint to a more greenish color.
Press
E
to change the tint to a more purplish color.
Press
<
to store.
Adjusting the Sharpness
Press
F
to sharpen the Sharpness.
Press
E
to soften the Sharpness.
Press
<
to store.
Adjusting the Ambient Sensor
Automatically adjusts the Sharpness to an optimized level that matches the brightness of the surrounding area.
Each time
E
or
F
is pressed, the setting is switched.
On < Off
Press
<
to store.
Note
• The screen display disappears if there is no operation within approximately 60 seconds.
• Depending on the model or the optional devices, some of the functions may not be available.
• The adjustment range varies according to the display signals. Make adjustments to your preferred Sharpness within the adjustment range.
• Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
MHD01661-02_E.book 21 ページ ２００４年１２月２２日 水曜日 午後５時１５分