Fisher & Paykel DD602I - Manual (Page 16)

STEP 5.1 INTEGRATED DRAWER FRONT & TOE KICK
DIMENSIONS
5.1.1
Use the following diagrams to work out the dimensions for the Integrated Panels for Drawer
Fronts and Toe Kicks..
I
N
T
E
G
R
A
T
E
D
P
R
O
D
U
C
T
O
N
L
Y
IMPORTANT
Allow for any
obstructions at the top of
the cavity when allowing
for space between the
countertop and
DishDrawer.
Recommended Drawer
Front thickness for
Integrated products is
5 /
8
" to 3 /
4
" (16mm to
18mm).
Recommended Toe Kick
thickness is 3 /
8
" (9mm).
IMPORTANT
A 1 /
4
” (6mm) gap must be
provided between top
and bottom Drawer Front
in the position shown.
IMPORTANT
Page DD_15
SECTION 5
INFORMATION FOR CABINET MAKER FOR
INTEGRATED DISHDRAWER
IMPORTANT
Drawer Front material
must be suitable for
damp conditions or
adequately sealed to
withstand moisture.
Additional protection
can be provided by using
a “Moisture Resistant
Board”.