Fisher & Paykel DD602I - Manual (Page 15)

Page DD_14
4.3.3
If the height of the Lower Toe Kick is
greater than 1 1 /
4
" (32mm) , insert the Toe
Kick Brace in between the two lowest ribs
of the Lower Toe Kick.
4.3.4
Insert the Toe Kick Pins into the Lower
Toe Kick. These will hold the Brace in
place.
Orientate the
Lower Toe Kick
so that the arrow
points upwards.
Toe Kick
Brace
STEP 4.4 ADJUSTING THE UPPER TOE KICK
4.4.1
Snap the Lower Toe Kick into the Clip
Pegs in the Slide Retainer.
Measure the gap between the Lower and
Upper Toe Kick at the left and right sides.
4.4.2
Remove the Upper Toe Kick and using
the increments, adjust to allow a 3 /
32
"
(2.5mm) gap between the two Toe Kicks.
Replace the Upper Toe Kick and check.
25
26
27
80
9
8
7
6
5
4
28
29
30
80
9
8
7
6
5
4
3
2
1
7
8
65
4
9
20
19
10
11
12
13
14
15
16
17
18
32
4
5
6
7
8
Upper Toe Kick
Lower Toe Kick