Making a test print – Falcon Graphics RJ-6000 Series User Manual

Page 48

Text mode
Original mode

Make a test print to verify that the printer is working properly.

Step 1
Open the cover and check that the hold lever is up.

Step 2
Press the [MEDIA] key to light the Sheet media LED. (Cut media is selected)

Step 3
Load an A3 size sheet of cut media and
put the hold lever down.

Step 4
After initialization has finished, press
the [Test Print] key (RESOLUTION,
VALUE key) while you are pressing the
[shift] key. (Test print: pale blue)

Test print sample (paste your test print on this page)

Making a Test Print

RJ-6000 Series USER GUIDE Basic Edition

Preparing for Printing

P r i n t i n g

P l o t

O K

• If you are unable to

make a test print like
the above sample,
contact your local
Mutoh dealer.

NOTE

Paste your test print on this bordered Paste your test print on this bordered