Fisher-Price C0727 - Manual (Page 12)

12
Assembly
• Align the tips of the screws with the holes in the other
sport bar cover marked RON. Fit the two sport bar
covers together.
• Tighten the screws.
Sport Bar
Cover
(RON)
Screw Tips
Sport Bar
Hood
Grille
• Lift the hood.
• Fit the tabs at the bottom of the grille into the slots in the
vehicle body.
• Press near the top of the grille to snap it into the
vehicle body.
• Lower the hood.
• Fit the tab on one side of a headlight lens into the notch
in the grille.
• Push firmly to snap the tab on the other side of the
headlight lens into the grille.
• Repeat this procedure to assemble the other
headlight lens to the grille.
Headlight
Lens
Tab
Grille
• Using safety scissors, separate the sport bar covers.
Dispose of the plastic connector.
• With the ends of the sport bar angled toward you, fit
the sport bar cover marked “BAC” to the sport bar.
• Align the holes in the sport bar with the holes in the sport
bar cover.
• Insert two #6 x 1 1 /
2
" screws through the sport bar cover
and into the sport bar, as shown.
Sport Bar
Cover
(BAC)
Sport Bar
Holes
16
17
18
19