Franklin RF-192 - Manual (Page 42)

41
Transmitting or Receiving Records
Connecting the Serial Cable
Before you can transmit or receive records you need
to do the following:
1. Turn your personal computer
off.
2. Connect the 9-pin plug of the
Organizer PC Sync cable into a
free communications (COM)
port.
3. Connect the single-pin plug of the cable into
the PC PORT hole on the left side of your
organizer.
Configuring the Organizer Software
1. On your personal computer, go to
C:\ORGANISER | DBANK.EXE and start up your
Organizer PC Sync.
2. Select Databank Model from the Options menu.
3. On the Model Setup window, select Series L.
4. Click OK.
5. Select Serial Port from the Options menu.
6. On the Serial Port Setup window, select the
COM port into which you plugged the Organizer